Work Emotion

Work Emotion CR Shigoku

From $595.00
Exact fitment and specifications confirmed before final quote

Price shown per wheel - final cost varies by specification
Shipping quoted seperately before order confirmation
Built to order in Japan to your exact specifications
Fitment verified before purchase - no guesswork

Color :

Size (Diameter & Width) :

Confirm Fitment

Request Quote

Overview

The legitimate evolution of the CR Kiwami. WFT flow-formed construction meets precision side-machining for a deeper concave, sharper spokes, and reduced unsprung weight — all while achieving a stronger 720kg test rating. TPMS and M14 bolt compatible. Reliably Made in Japan to WORK's strict quality standards.

What’s Included?

• Air valve/1x(V29K2)
• Center cap: optional (sold separately)

Fitment Information

Fitment varies by size, width, inset (offset) and PCD. Brake caliper clearance and disc protrusion can differ by spec.
Before ordering, confirm:
• PCD + centre bore compatibility
• Brake clearance (including big brake kits)
• Guard/suspension clearance at your ride height
If you’re unsure, submit your vehicle details and we’ll confirm the correct specifications before purchase.

Shipping & Delivery

WORK wheels are sourced from Japan (made-to-order availability varies by specification).
• Lead time depends on size/finish/PCD and current factory schedule
• We will confirm availability and estimated ETA before finalising your order
• Shipping is quoted based on your delivery address and the final wheel spec

Details Available Sizes & Specs Face Design Features Warranty

The WORK EMOTION CR Shigoku is the next evolution of the CR Kiwami. WORK's benchmark twin 5-spoke, reborn for the modern sports car era.

Built on WFT (WORK Flow Forming Technology), the Shigoku pairs forged-comparable rigidity with precision side-machined spokes, sharpening the concave profile while significantly reducing unsprung weight. Despite the weight savings, strength has actually increased, with the Shigoku clearing a stricter 720kg test load rating compared to the Kiwami's 700kg.

The result is a wheel that's lighter, stronger, and more responsive to drive. Fully TPMS and M14 bolt compatible, and reliably Made in Japan to WORK's strict quality standards.

The WORK EMOTION CR Shigoku is offered in 17" to 19" diameters to suit modern sports and performance platforms:

Diameters: 17", 18", 19"
Widths: 7J up to 10.5J
Offsets: Broad range available depending on spec (from low to high offsets to suit a variety of fitments)
PCD: 5x114.3 / 5x100 / 5x120 / 4x100 / 4x98
Construction: WFT flow-formed with precision side machining for reduced unsprung weight

Exact specs vary by width and offset. Fitment is typically confirmed per vehicle and brake setup. TPMS and M14 bolt/nut compatible. Centre caps are sold separately. Made in Japan.

The Work Emotion CR Shigoku is offered in four concave face profiles, each determined by rim width and inset to maximise the forged construction's visual and functional potential:

Semi – Minimal concavity suited to higher offset fitments, offering a clean and understated profile
Middle – Mild concavity with increased spoke depth for a stronger visual presence on street builds
Deep – Medium-deep concavity for a more aggressive stance, suited to wider, lower offset setups
Ultra Deep – Maximum concavity, delivering the most dramatic inward curvature for wide, aggressive fitments and full show-spec builds

Face type is determined by width and offset, so the final profile depends on the specific spec chosen.

The WORK EMOTION CR Shigoku is engineered as the legitimate evolution of the CR Kiwami, built for drivers demanding the highest levels of lightweight performance on modern sports and performance platforms.

• WFT Flow-Formed Construction – Rim-spun flow forming delivers rigidity comparable to a forged wheel while enabling significant weight reduction
• Twin 5-Spoke Design – Slender, side-machined spokes with a deep concave profile, sharpened through stress analysis for reduced weight without compromising strength
• Reverse-Face Logo – "Shigoku" branding placed on the rear face rather than the surface, reflecting a more refined, understated identity
• WAE Engraving – "WORK Advanced Edition" mark denotes wheels developed using advanced computer stress analysis to push beyond conventional design limits
• Strength-Optimised Spoke Base – Narrower spoke geometry engineered via stress analysis, achieving a higher 720kg test load rating despite reduced material

All products are covered by the manufacturer’s official warranty against structural defects. Warranty terms are subject to manufacturer policy. Improper installation, misuse, motorsport use, or damage caused by road hazards is not covered.

Installed & In Motion

Built to Your Exact Specification

Many Japanese wheels can be configured beyond standard catalogue sizing, allowing key fitment and visual details to be tailored to your vehicle and build goals. Depending on the model, available options may include:

Not every configuration is displayed online. For tailored fitment, finish or build requirements, submit your vehicle details through our fitment form.

Discuss Your Build

Work Emotion CR Shigoku

Installed & In Motion

Built to Your Exact Specification

Custom Widths

Tailored Offset

Disk Profile

Finishes

Hardware

Centre Caps

How Ordering Works

Send us your details

We confirm fitment & pricing

Secure with a deposit (if required)

Delivery & support

Work Emotion CR Shigoku

Installed & In Motion

Built to Your Exact Specification

Custom Widths

Tailored Offset

Disk Profile

Finishes

Hardware

Centre Caps

How Ordering Works

Send us your details

We confirm fitment & pricing

Secure with a deposit (if required)

Delivery & support

Stay Updated with Genuine JDM Parts